Mighty Hoop 4.375" Round (including brackets)

4.375" Round Mighty Hoop with brackets

Only from ETC Supplies

CLICK HERE FOR HOOP FIELD SIZE INFORMATION

The only embroidery frame to hold thick heavy garments during embroidery.

Mighty Hoop 4.375” Round

This hoop has an inside dimension that is 4.375" round. That dimension is the same size as a standard Tajima 12cm hoop, as well as many other hoop brands. Please note that your actual sewing area will be determined by the size of your presser foot. Most machines will be able to sew approximately 3 3/8 to 3 5/8". This Mighty Hoop was designed for items like sleeves and cap backs. It was not made to hold thick and heavy items, like the original Mighty Hoops. It was designed with smaller magnets allowing it to have a smaller outer ring. This makes it easier to get into tight areas. It will not be able to hoop thick bags, workwear, leather, or other difficult fabric. The 4.25"square Mighty Hoop would be a better option for that type of embroidery. The 4.375" Mighty Hoop will fit most commercial embroidery machines, including the Brother and Baby Lock 6 and 10 needle machines.

The inside dimension of this hoop is 4 3/8" (4.375", or 111mm)

Actual sewing area depends on brand of machine

Approximately 3.6" or 91mm

This will fit most industrial embroidery machines with a field size of 360 or over. Please select the correct brackets for your brand of machine.

This Mighty Hoop will fit Brother PR 600 to 1000 series machines. Please select Brother PR brackets.

This Mighty Hoop will fit Brother Persona and VR single needle machines. Please select Brother PR brackets. No special PRS/VR brackets required.

This Mighty Hoop will fit Tajima Sai machines. Please select Sai brackets.

Made in the USA

Patented Design