Mighty Hoop-14"x14"PR

Mighty Hoop 14” x 14” for Brother PR Machine only. FLAT TYPE

Only from ETC Supplies

The only embroidery frame to hold thick heavy garments and Horse blankets etc. during embroidery.

MH-1414 – This hoop needs to be ordered specifically for the Brother or Baby Lock 10 Needle Machine because it is a slightly different and requires special brackets.

The PR 14 X 14 Mighty Hoop is the same as the 14" x 16" Mighty Hoop except it has a special FLAT base that the brackets are attached to. When you order this hoop for the PR machine we call this 14" x 14" but the hoop we supply is marked 14" x 16".

Our 14" x 16" hoop, is basically the same hoop just slightly different for the commercial machines. When used on other commercial machines the 14" x 16” hoop would require the 13" x 16” brackets.

Since these hoops are so new, they have not been tested yet on any machine other than the 10 needle Baby Lock and Brother.

PLEASE DO NOT ORDER THIS MIGHTY HOOP FOR PR MACHINES UNLESS YOU KNOW HOW TO USE IT.

Mighty Hoop 14” x 14”

The inside dimension of this hoop is 14.8 x 15.81”

(14“x 16”, or 376mm x 402mm)

Actual sewing area

Approximately 13.75” x 13.75" (349mm x 349mm)

This hoop was designed for the Brother and Babylock 10-needle Machines ONLY. The hoop will work on the “B” Frame arms. You will also need to use the Flat Table that comes with your machine and the Split Design Software. The machine will use this hoop and sew two parts. The first part will go into the machine and sew the first design. Then you will take the hoop out and put the hoop in backwards to sew the second design. Because of this, only Flat items like Blankets, Quilts, Towels and large thick jackets will work. No tubular items such as T-shirts, Sweatshirts or bags.

This Mighty Hoop will fit Brother PR600 to 1000 series machines.